Highly Sensitive Electrochemical Immunosensor Based on Mesoporous PdPt Nanoparticles Anchored on a Three-dimensional PANI@CNTs Network as Nanozyme Labels

In this study, a novel strategy to amplify electrochemical signals by mesoporous PdPt nanoparticles with core-shell structures anchored on a three-dimensional PANI@CNTs network as nanozyme labels (PdPt/PANI@CNTs) was proposed for the sensitive monitoring of α-fetoprotein (AFP, Ag). First, the mesoporous PdPt nanoparticles prepared by a facile chemical reduction method had excellent biocompatibility with biomolecules, which could capture a large amount of AFP-Ab₂ (Ab₂) and exhibit plentiful pores to entrap more thionine (Thi) into mesoporous PdPt nanoparticles with enhanced loading and abundant active sites. Furthermore, the resulting mesoporous PdPt nanoparticles were abundantly dotted on the surface of a three-dimensional PANI@CNTs network with excellent conductivity and a high specific surface area through the bonding of the amino group to form PdPt/PANI@CNTs nanozyme labels. Most importantly, the as-prepared PdPt/PANI@CNTs nanozyme labels exhibited unexpected enzyme-like activity towards the reduction of hydrogen peroxide owing to the highly indexed facets, enhancing the current response to realize signal amplification. In view of the advantages of nanozyme labels and the involvement of gold nanoparticles (AuNPs, which behave as electrode materials) for the sensitive determination of AFP, the as-developed immunosensor could obtain a dynamic working range of 0.001 ng mL^−1–100.0 ng mL⁻¹ at a detection limit of 0.33 pg mL⁻¹ via DPV (at 3σ). Furthermore, the nanozyme-based electrochemical immunosensor exhibited remarkable analytical performance, which brought about feasible ideas for disease diagnosis in the future.     

Amperometric detection of indapamide on glassy carbon electrode

This work describes the development of a fast, precise and reliable voltammetric method for the quantification of indapamide, an orally active diuretic sulfonamide used for hypertensive treatment. This compound acts inhibiting sodium reabsorption and increasing the elimination of water. This characteristic was responsible for its banishment by the International Olympic Committee since 1999. The study begins by finding an adequate potential range (−0.20 to 0.30 V) to avoid poisoning the working glassy carbon electrode (GCE) in phosphate buffer 0.10 mol L⁻¹ (pH=12.0). Utilizing flow injection analysis, linear responses between 2.0 × 10⁻⁶ mol L⁻¹ to 2.5 × 10⁻⁵ mol L⁻¹ of indapamide (R²=0.995), and detection limit (LOD) 3.0 × 10⁻⁷ mol L⁻¹ were obtained. This method was applied for the quantification of indapamide in tablets and in synthetic urine. The same flow system was used for the analysis of commercial drugs and the response obtained corresponded to 98 % of the concentration indicated on the drug label. These tablets were also analyzed by high performance liquid chromatography (HPLC), obtaining a recovery of 103 % and LOD 4.0 × 10⁻⁷ mol L⁻¹. The velocity of analysis using flow methods compares advantageously to the classical chromatographic methods. For synthetic urine, linear responses were obtained in samples spiked in the region from 5.0 × 10⁻⁶ mol L⁻¹ to 30 × 10⁻⁶ mol L⁻¹ (R²=0.991) and LOD 3.0 × 10⁻⁷ mol L⁻¹.     

Preparation of Fe−Co−LDH/MXene modified electrode for sensitive determination of arsenic (III) in aquatic system

3-dimensional (3D) Fe−Co−LDH/MXene composite was synthesized by in-situ synthesis and assembly of Fe−Co−LDH rod around MXene under hydrothermal condition. Due to the unique 3D configuration and good conductivity, the obtained Fe−Co−LDH/MXene modified glassy carbon electrode (Fe−Co−LDH/MXene/GCE) showed excellent electrochemical activity for As(III) detection. Via square-wave anodic stripping voltammetry, the response current on Fe−Co−LDH/MXene/GCE had good linear relationship with As(III) concentrations (1∼1000 ppt) with superior sensitivity (0.22 μA ppt⁻¹ cm⁻²) and low detection limit (0.9 ppt). The mechanism of As(III) adsorption was demonstrated. The electrode showed excellent anti-interference ability. Real water sample analysis demonstrated the Fe−Co−LDH/MXene/GCE was deployable in aqua-system.     

An Electrochemical Sensor Fabricated by Sonochemical Approach for Determination of the Antipsychotic Drug Haloperidol

A nanocomposite (Ho₂O₃NPs/BNT) was synthesized by decorating holmium(III)oxide nanoparticles (H₂O₃NPs) on bentonite (BNT) through a realizable sonochemical approach for the electrochemical detection of haloperidol (Hlp). A glassy carbon electrode was modified with this nanocomposite. The Ho₂O₃NPs/BNT modified electrode outperformed bare and other modified electrodes in terms of electrochemical performance for Hlp detection in a pH 8.0 phosphate buffer. The proposed electrochemical platform showed a wide linear range (0.01 μM–24 μM), low detection limit (2.4 nM), and high sensitivity by square wave voltammetry. In addition, the proposed electrochemical sensor met the clinical criteria in terms of stability, selectivity, and repeatability.     

Highly Sensitive Enzyme-free Sensor Based on a Carbon Paste Electrode Modified with Binary Zinc Oxide/Polyaniline Nanocomposites for Dopamine,Ascorbic Acid and Uric Acid Sensing

Hybrid composites ZnO/PANI were facily synthesized by a sonication process at room temperature. This procedure is non-expensive, time/energy saving and environmentally safe. The as-prepared ZnO/PANI were characterized by FTIR, UV-vis spectroscopies and SEM in order to investigate the structure and morphology of the studied composites. The samples were used to modify carbon paste electrode (CPE) in order to develop electrochemical biosensors (ZnO/PANI/CPE). The sensing properties of the nanoparticles were evaluated for dopamine, ascorbic acid and uric acid non-enzymatic detection. The effect of percentage of polyaniline in the composites and the effect of calcination on the biosensor's response were also examined in the present study. It was revealed that the existence of PANI in ZnO/PANI/CPE largely enhanced the electroactive surface area and therefore the sensitivity for electrochemical sensing. A good electrochemical behavior was noted for ZnO/40 wt% PANI-cal/CPE modified electrode toward DA, AA and UA oxidation. The electroactive surface area of the previously mentioned modified electrode (0.235 cm²) was two times higher than that of the bare electrode (0.117 cm²). The liner relationships between current intensities and concentrations were found to be 0.01–1.4 mM, 0.1–1.3 mM and 0.01–0.12 mM, with detection limit of 0.029 mM, 0.063 mM and 0.007 mM, for DA, AA and UA respectively. In the mixtures of ascorbic acid (AA), dopamine (DA) uric acid (UA) and glucose (Glu) the sensor showed high selectivity of DA with low interference of ascorbic acid by a current change of 14 %. The as-prepared ZnO/PANI/CPE biosensor displayed a good reproducibility and stability.     

Design and Development of a Non-Enzymatic Electrochemical Biosensor for the Detection of Glutathione

Glutathione (GSH-reduced form) is a tripeptide that plays a vital role as an antioxidant to remove xenobiotics in the human body and changes in GSH levels are a marker for the progression of various diseases. In this context, a highly sensitive non-enzymatic electrochemical biosensor for the detection of GSH has been developed using reduced graphene oxide Manganese oxide (rGMnO) nanocomposite as the nano-interface. Initially, graphene oxide was synthesized by Hummer's method and then thermally reduced in the presence of MnO₂ in a blast furnace to obtain rGMnO nanocomposite. The nanocomposite was characterized to validate its structure and morphological properties via Scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman, and X-ray photoelectron spectroscopy (XPS). Cyclic voltammetry and amperometry studies showed that upon the addition of GSH, the Pt/rGMnO modified working electrode exhibited a linear response in the range of 1–100 μM at an input voltage of −0.62 V. The developed sensor was found to have a sensitivity of 0.3256 μA μM⁻¹ and LOD of 970 nM with a recovery of 92–104 % in real blood serum samples.     

Electrochemical Sensing Platform Based on Graphene Oxide-chitosan for Simultaneous Determination of some Antihypertensive Drugs

The development of selective and simple methods for the determination of different analytes is of great interest. This is the first time to show the applicability of graphene oxide-chitosan (GO-CS) nanocomposite for designing an electrochemical nanosensor for determination of Amlodipine, Valsartan, and Hydrochlorothiazide, simultaneously. Differential pulse voltammetrics current of AML, HCT, and VAL increased linearly in the ranges of 0.1–110, 0.1–110, and 1–230 μM with LOD of 5.5×10⁻², 3.5×10⁻² and 8.6×10⁻² μM, respectively. Finally, GO-CS/GCE was used for the detection of these drugs in commercial tablets and compared with the reference method (HPLC).     

Functional Peptides from One-bead One-compound High-throughput Screening Technique

Combinatorial chemistry provides a cost-effective method for the rapid discovery of new functional peptides. One-bead one-compound(OBOC) high-throughput screening technique offers a lot of structurally diverse peptides to be rapidly synthesized and screened for binding to a target of interest. The OBOC peptide library screening involves three main steps: library construction, positive beads separation, and peptide sequencing. This review mainly summarizes some special technique tips during functional peptide screening and potential future directions of the OBOC high-throughput screening technique.     

Chalcogen Effect of Atom Substitution on the Properties of Tris(2,4,6-trichlorophenyl)methyl(TTM) Radical

Luminescent open-shell organic radicals have recently been regarded as one of the most potential materials in organic light-emitting diodes(OLEDs). Herein, we have synthesized two new organic radicals, namely tris{4-[4-(tert-butyl)phenoxy]-2,6- dichlorophenyl}methane radical(TTM-O) and tris(4-{[4-(tert-butyl)- phenyl]thio}-2,6-dichlorophenyl)methane radical(TTM-S), by the substitution of chalcogen atom elements at the para position of conventional tris(2,4,6-trichlorophenyl)methyl(TTM) radical moiety. Interestingly, both TTM-O and TTM-S exhibited significantly enhanced photostability compared with the unsubstituted TTM radical parent. Moreover, the chalcogen atom also had a crucial impact on the photoluminescence quantum yield(PLQY) of the radicals, i.e., the PLQY of TTM-S was greatly enhanced compared to TTM radical while TTM-O was nearly non-emissive. Particularly, TTM-S showed intense PLQY of 37.54% and 185-fold longer photostability than that in cyclohexane solution of TTM.     

Highly Selective Photoelectroreduction of Carbon Dioxide to Ethanol over Graphene/Silicon Carbide Composites

Using sunlight to produce valuable chemicals and fuels from carbon dioxide (CO₂), i.e., artificial photosynthesis (AP) is a promising strategy to achieve solar energy storage and a negative carbon cycle. However, selective synthesis of C₂ compounds with a high CO₂ conversion rate remains challenging for current AP technologies. We performed CO₂ photoelectroreduction over a graphene/silicon carbide (SiC) catalyst under simulated solar irradiation with ethanol (C₂H₅OH) selectivity of>99 % and a CO₂ conversion rate of up to 17.1 mmol g_cat⁻¹ h⁻¹ with sustained performance. Experimental and theoretical investigations indicated an optimal interfacial layer to facilitate the transfer of photogenerated electrons from the SiC substrate to the few-layer graphene overlayer, which also favored an efficient CO₂ to C₂H₅OH conversion pathway.